Unit Price : RM 300 (Prices are subject to change without notice)
Country Malaysia
Arduino Yun 32u4 MCU Linux Board
Arduino Yun is the first member of a new groundbreaking line of wifi products combining the power of Linux with ease of use of Arduino.The first Arduino Yun is the combination of a classic Arduino Leonardo (based on the Atmega32U4 processor) with a Wifi system-on-a-chip running Linino (a MIPS GNU/Linux based on OpenWRT). We embedded the Linux machine directly on the PCB of the Arduino Leonardo and we connected the two so that from Arduino it’s very easy to run commands on the Linux side and use it as an Ethernet and Wifi interface.
Atmel Microcontroller:
ATmega32u4 16MHz microcontroller, 32KB Flash memory, 2.5KB RAM, 1KB EEPROM
Bootloader uses 4KB of Flash memory
Operating Voltage: 5V
Input Voltage: 5V via microUSB or PoE 802.3af (Limits: 6 to 20V)
14 x GPIO Pins: 6 x multiplexed analogue input channels
6 x analogue input channels
7 x PWM channels
DC Current per I/O Pin: 40mA
Linux Processor:
MIPS 24K 400MHz microprocessor SoC
On-board 64MB DDR2 RAM and 16MB SPI Flash memory
Complete IEEE 802.11bgn 1x1 AP or router
USB 2.0 host/device
PoE compatible 802.3af
MicroSD card support
ATmega32u4 16MHz microcontroller, 32KB Flash memory, 2.5KB RAM, 1KB EEPROM
Bootloader uses 4KB of Flash memory
Operating Voltage: 5V
Input Voltage: 5V via microUSB or PoE 802.3af (Limits: 6 to 20V)
14 x GPIO Pins: 6 x multiplexed analogue input channels
6 x analogue input channels
7 x PWM channels
DC Current per I/O Pin: 40mA
Linux Processor:
MIPS 24K 400MHz microprocessor SoC
On-board 64MB DDR2 RAM and 16MB SPI Flash memory
Complete IEEE 802.11bgn 1x1 AP or router
USB 2.0 host/device
PoE compatible 802.3af
MicroSD card support
No comments:
Post a Comment